Airtac Angled HPA Adapter - 2 in 1 for Glock / AAP and Hi-Capa

YOU GET BOTH THE GLK/AAP AND HI-CAPA MODULAR TOPS WITH THIS HPA ADAPTER

The perfect HPA adapter for CQB and speedsofters! The angled adapter runs the M4 magazine parallel to your wrist for a smaller vertical profile. 

Highly impact resistant, with a CNC aluminium ambi-magazine catch, making the mag change the same regardless of which hand your pistol is in, and a CNC aluminium feed tube.

Designed for use with PTS M4 Magazines (EPM/EPM1/EPM1S). Other M4 magazines may fit. Looks coolest with the 170-round PTS EPM1S. Your adapter will come with several shims that can be used to ensure snug fitment of your M4 magazine.

Changing the modular tops

To change your modular top, you can simply use the included 1.5mm hex key (or a screwdriver if you value your time) and unscrew the two screws on the side of the adapter. You can then remove the top, place your new top on, and screw it back in. You do not need to remove your gas magazines from the modular base when changing over. You don't even need to remove your AEG magazine! 

What if I have an EU line?

If you have an EU line, you can buy an EU fitting for the adapter here. It comes with the correct-sized wrench; just unscrew the US and screw in the EU fitting. Remember, if you plan to have multiple modular bases, you'll need multiple EU fittings

Warranty

Naturally, like all Airtac products, this carries a lifetime warranty.

Package Contents

• GLK Modular Top
• GLK Single Stack
• Hi-Capa Modular Top
• Hi-Capa Single Stack
• Angled Adapter Base
• 1.5mm Hex Key
• 2*Magazine O-Rings

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG, AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE